ទំព័រដើម > General > អក្សរខ្មែរលើ Android 2.3 សាំសុងហ្កាឡាក់ស៊ី ថេប៧អ៊ីង

អក្សរខ្មែរលើ Android 2.3 សាំសុងហ្កាឡាក់ស៊ី ថេប៧អ៊ីង

ប្រហែលជា៤ខែកន្លងទៅ ខ្ញុំបានទទួលឯកសារមួយ ដែលជាអំណោយដ៍ថ្លៃថ្លា ពីកូនខ្មែរមានស្នាដៃលើផ្នែក យូនីកូដគឺជា browser ដែលអាចបើកខ្មែរយូនីកូដលើ Android បាន។ ជាយូពេលខ្ញុំគ្មានឱកាសបានសាកល្បងសោះ ទើបពេលថ្មីៗនេះខ្ញុំបានដាក់សាកលើ galaxy tab ខ្ញុំដែលទើប នឹង hack ដាក់ បញ្ជូល Android 2.3 (ដើរស្រួលនឹងលឿនជាង Android 2.2) ។

ពេលបើកឃើញថាពិតជាអាចមើលអក្សរខ្មែរបាន ប្រមាណជា ៩៥%  (៥%ទៀតនៅមិនទទួលស្គាល់ដូចជាbold រឺ Italic)

ជាថ្មីម្តងទៀតសូមអរគុណដល់បងដែលបានផ្តល់ជូនកម្មវីធីនេះ

មើលអក្សរខ្មែរលើ android 2.3 :

ចំណាត់ក្រុម ៖General
  1. ខែសីហា 6, 2011 ម៉ោង 6:40 ព្រឹក

    មានដាក់អោយដោមឡូតនៅបង?
    បើមានតើពេលកណា?

  2. Hero
    ខែសីហា 7, 2011 ម៉ោង 3:39 ល្ងាច

    តើអាចជួយប្រាប់ពីវិធី Upgrade Android 2.2 ទៅ 2.3 ផងបានអត់?
    សូមអរគុណទុកជាមុន!

  3. ខែសីហា 7, 2011 ម៉ោង 9:15 ល្ងាច

    (ខ្ញុំអត់មានពេលបកប្រែទេ តែសង្ឃឹមថាអាចជួយបាន តែសូមផ្តាំថា សំរាប់តែ GSM samsung galaxy tab តែប៉ុណ្ណោះ ជួយ២.២ ទៅ ២.៣ ហើយមានបញ្ហាខ្ញុំមិនហ៊ានធានាជូនទេ តែខ្ញុំធ្វើលើ Tmobile galaxy tab ខ្ញុំគ្មានបញ្ហាឡើយ​)

    Before, make you sure Galaxy Tab Drivers are installed. Either use KIES, Windows Update (Not sure if it will work this way) or download them from here : http://downloadcente…_v1.3.350.0.exe

    Download these files and place them in a folder together on your desktop.

    1. Main Firmware (227MB) <————- http://www.multiupload.com/IZLCKQ3VJC
    2. Pit File (557b) <——————— http://www.thegalaxy…h&attach_id=156
    3. dbdata fie (1.92Kb) <—————– http://www.thegalaxy…h&attach_id=157
    4. Rooted Kernel (5.99MB) –OPTIONAL) <- http://www.thegalaxy…h&attach_id=159
    5. Flashing Program (196.71K) <——— http://www.thegalaxy…h&attach_id=158

    ———————————————————————————————-

    មើលវីដេអូនឹងធ្វើតាមទៅតាមកានែនាំ៖


    0. Preparing to Flashing the firmware

    1. Take the main firmware and unzip the file using winzip or another extraction program. When it unzips you will be left w/ a .tar file. This is the file you will need to flash.

    2. Unzip ODIN V1.7. You will have several files in the folder. you will use the file called Odin.exe

    3. Unzip the pit file. you will be left w/ a .pit file

    4. Unzip the dbdata file and you will be left w/ a file named dbdata.tar.

    Take all those files and put them in a folder inside the main folder so they are in one spot and easy to find.

    1. Flashing the Firmware

    1. Double click ODIN.exe to run the program.

    2. Make sure your tab to turned off. Hold the Power and Volume down button at the same time and it will have a android guy in a triangle w/ a shovel and hook it up to your computer. This is the download mode.

    3. in the PDA section of odin place the main firmware .tar file in that section.

    4. Place the .pit file in the pit section and make sure repartition is selected.

    5. Hit start and it will flash the firmware.

    2. Second Phase to flashing Firmware

    you tab will reboot after the firmware flashes. Shut it down.

    1. Place tab in DL mode again and hook it up to your computer. Power button and Volume Down at the same time.

    2. Place dbdata.tar into the PDA section in ODIN (DO NOT SELECT REPARTITION)

    3. Hit start and it will flash the .tar file.

    4. Shut down the tab.

    3. Phase Three of Flashing Firmware

    We will be placing your tab into recovery mode. In Recovery Mode you will use the volume up and down keys to navigate and home key to select.

    1. Hold Power and Volume up together.

    2. Release Power after holding it for about 4-5 second and continue to hold the Volume Up button until recovery menu shows up.

    3. Select wipe cache (When Done go to next step)

    4. Select wipe data/factory reset.

    5. Select reboot and you are done. You now have Android 2.3.3 Gingerbread.

    4. Flashing of OPTIONAL rooted kernel GSM TABS ONLY

    This is to be done after all the steps above have been done.

    1. unzip the CFroot file and you will have a .tar file.

    2. Start the ODIN program

    3. put the .tar file in the PDA section in ODIN (DO NOT SELECT REPARTITION)

    4. Place your tab into DL Mode and hook it up to your computer

    5. Hit start

    you will now have a rooted tab and ClockWorkMod recovery installed.

  4. Hero
    ខែសីហា 9, 2011 ម៉ោង 3:08 ល្ងាច

    អរគុណ!​ ខ្ញុំនឹងព្យាយាម៕

  5. Hero
    ខែសីហា 9, 2011 ម៉ោង 3:09 ល្ងាច

    អរគុណច្រើន! ខ្ញុំនឹងព្យាយាម៕

  1. No trackbacks yet.

ឆ្លើយ​តប

Fill in your details below or click an icon to log in:

ឡូហ្កូ WordPress.com

អ្នក​កំពុង​បញ្ចេញ​មតិ​ដោយ​ប្រើ​គណនី WordPress.com របស់​អ្នក​។ Log Out / ផ្លាស់ប្តូរ )

រូប Twitter

អ្នក​កំពុង​បញ្ចេញ​មតិ​ដោយ​ប្រើ​គណនី Twitter របស់​អ្នក​។ Log Out / ផ្លាស់ប្តូរ )

រូបថត Facebook

អ្នក​កំពុង​បញ្ចេញ​មតិ​ដោយ​ប្រើ​គណនី Facebook របស់​អ្នក​។ Log Out / ផ្លាស់ប្តូរ )

Google+ photo

អ្នក​កំពុង​បញ្ចេញ​មតិ​ដោយ​ប្រើ​គណនី Google+ របស់​អ្នក​។ Log Out / ផ្លាស់ប្តូរ )

កំពុង​ភ្ជាប់​ទៅ​កាន់ %s

%d bloggers like this: