ទំព័រដើម > Uncategorized > របៀបដាក់ jailbreak នឹង unlock iphone 3g, 3gs firmware Ver. 4.2.1

របៀបដាក់ jailbreak នឹង unlock iphone 3g, 3gs firmware Ver. 4.2.1

តាមរយះក្រុម​dev-teamបានបង្កើតសូហ្វវែ មួយឈ្មោះថា redsn0w version 0.9.6b4 ដែលដាក់ jailbreak នឹង unlock iphone 3g, 3gs firmware Ver. 4.2.1 ប្រភេទចុងក្រោយបាន។

(ត្រូវចងចាំថាត្រូវ backup អាយហ្វូនសិនមុនពេលដំណើរការ Unlock)

តើត្រូវធ្វើយ៉ាងដូចម្តេច? ទីមួយយើងត្រូវ jailbreak ជាមុនសិន នឹង បន្ទាប់មក យើងត្រូវប្រើ កម្មវិធីមួយឈ្មោះថា ultrasn0w ដើម្បី unlock (មើលអត្ថបទ របៀបUnlock ជាមុនសិនមុនដំណើរការ)

ត្រូវដឺង៖

  • ប្រសិន iPhone3G, old-bootrom iPhone3GS, or non-MC (ម៉ៅដែល), វាងាយស្រួល an untethered jailbreak.
  • តែបើលោកអ្នក មានប្រភេព Model MC (ផ្តើមដោយ MC ) គ្រោយពី jailbreak ហើយ រៀងរាល់ពេលអស់ថ្មររលីង ហើយពេល អាយហ្វូន ដំណើរការនោះ តំរូវអោយអ្នក connect ទៅ computer របស់អ្នកឡើងវិញ (ដូច្នេះមិនបណ្តោយទូរស័ព្ឋរបសើអស់ថ្មររលីងឡើយ)
  • ទោះបីជាយ៉ាងណាក៍ redsn0w ប្រភេទថ្មី កំពុងដំណើរការសាកល្បង ដោយមិនចាំបាច់ទាមទា tether ឡើង ខ្ញុំនឹងសសេរបង្ហាញ ពេលសាកល្បងនឹង បញ្ចេញជាផ្លូវការ
  • របៀប jailbreaK ដោយប្រើ redsn0w version 0.9.6b4 លើ​ iphone 3g, 3gs firmware Ver. 4.2.1

    (ប្រភពពី http://www.iphonehacks.com

    Step 1: Download Redsn0w 0.9.6b4 by clicking here and save the application in a folder named “Pwnage” on your desktop.

    Step 2: You need to download iOS 4.2.1 firmware file:

    iOS 4.2.1 firmware file for iPod Touch 2G users (iPod2,1_4.2.1_8C148_Restore.ipsw)

    iOS 4.2.1 firmware file for iPod Touch 3G users (iPod3,1_4.2.1_8C148_Restore.ipsw)

    iOS 4.2.1 firmware file for iPod Touch 4G users (iPod4,1_4.2.1_8C148_Restore.ipsw)

    Step 3: Double click the Redsn0w zip file and extract the application to the Pwnage folder.

    Step 4: Connect your iPod Touch to the computer, which should automatically launch iTunes.

    Step 5: From the ‘Devices‘ section on the left pane of iTunes, select your iPod Touch device. Now, hold down the Shift button and click the ‘Restore‘ button.

    Jailbreak iOS 4.2.1 - Redsn0w

    Step 6: Navigate to the Pwnage folder on the desktop and select the downloaded iOS 4.2.1 firmware file (iPod Touch 4G users: iPod4,1_4.2.1_8C148_Restore.ipsw, iPod Touch 3G users: iPod3,1_4.2.1_8C148_Restore.ipsw, iPod Touch 2G users: iPod2,1_4.2.1_8C148_Restore.ipsw). Click on the ‘Choose‘ button to let iTunes update your iPhone with the required firmware.

    Step 7: Navigate back to the Pwnage folder and launch the Redsn0w application.

    Step 8: You will be asked to select the corresponding IPSW file. Click on the Browse button and select the iOS 4.2.1 firmware file (iPod Touch 4G users: iPod4,1_4.2.1_8C148_Restore.ipsw, iPod Touch 3G users: iPod3,1_4.2.1_8C148_Restore.ipsw, iPod Touch 2G users: iPod2,1_4.2.1_8C148_Restore.ipsw).

    Jailbreak iOS 4.2.1 - Redsn0wStep 9: Redsn0w will verify the firmware file and inform you if it has successfully identified it. Click on ‘Next‘ to proceed.Jailbreak iOS 4.2.1 - Redsn0wStep 10: Redsn0w will now start preparing the jailbreak data.Jailbreak iOS 4.2.1 - Redsn0w

    Step 11: You will now be prompted to select the jailbreak options you would like. A few of these may have already been selected by default. Make sure Cydia is selected and select ‘Next‘ to continue.

    Jailbreak iOS 4.2.1 - Redsn0w

    Step 12: You will now be prompted to switch OFF your iPod Touch and plug it to the computer. Follow the instructions and click on ‘Next‘ to move to the next screen:

    Jailbreak iOS 4.2.1 - Redsn0w

    Step 13: You will now need to put your iPod Touch into the DFU mode. Redsn0w will take you through the necessary steps:

    (a) Hold the Power button on iPod Touch down for 3 seconds:

    Jailbreak iOS 4.2.1 - Redsn0w(b) Now simultaneously hold the iPod Touch and keep the two buttons pressed for 10 seconds:Jailbreak iOS 4.2.1 - Redsn0w(c) Now release the Power button while keeping the Home button pressed until Redsn0w identifies the device:Jailbreak iOS 4.2.1 - Redsn0wStep 14: Your iPod Touch should reboot now.Jailbreak iOS 4.2.1 - Redsn0wStep 15: Redsn0w will now begin uploading the new RAM disk and kernel.Jailbreak iOS 4.2.1 - Redsn0wStep 16: You will now be notified once the jailbreaking process is complete. Click on the ‘Finish‘ button to exit the application.Jailbreak iOS 4.2.1 - Redsn0w

    Step 17: Your iPod Touch will reboot once again (which could take approximately 5 minutes). After it has rebooted, your iPod Touch should be successfully jailbroken. You should find Cydia jailbreak app on your iPod Touch’s home screen.

    Note:

    iPod Touch 4G and iPod Touch 3G users should select Just boot tethered right now from the options window and click Next to use Redsn0w to help you boot back into your jailbroken device on every reboot.

    Jailbreak iOS 4.2.1 - Redsn0w

    Hope this helped. Please don’t forget to drop us a line to tell us how it goes.

    ចំណាត់ក្រុម ៖Uncategorized
    1. មិន​ទាន់​មាន​មតិ។
    1. No trackbacks yet.

    ឆ្លើយ​តប

    Fill in your details below or click an icon to log in:

    ឡូហ្កូ WordPress.com

    អ្នក​កំពុង​បញ្ចេញ​មតិ​ដោយ​ប្រើ​គណនី WordPress.com របស់​អ្នក​។ Log Out / ផ្លាស់ប្តូរ )

    រូប Twitter

    អ្នក​កំពុង​បញ្ចេញ​មតិ​ដោយ​ប្រើ​គណនី Twitter របស់​អ្នក​។ Log Out / ផ្លាស់ប្តូរ )

    រូបថត Facebook

    អ្នក​កំពុង​បញ្ចេញ​មតិ​ដោយ​ប្រើ​គណនី Facebook របស់​អ្នក​។ Log Out / ផ្លាស់ប្តូរ )

    Google+ photo

    អ្នក​កំពុង​បញ្ចេញ​មតិ​ដោយ​ប្រើ​គណនី Google+ របស់​អ្នក​។ Log Out / ផ្លាស់ប្តូរ )

    កំពុង​ភ្ជាប់​ទៅ​កាន់ %s

    %d bloggers like this: